N
EWS
C
ONTACT
Shandong Fugelin SunShade Technology Co.,Ltd
Tel:0536-5676668
0536-5235333
Fax:0536-5676998
Email:alice@jinhuisunshade.com
Web: m.hhmanager.cnwww.jinhuisunshade.com
Current Location：Home》News
Rolling curtain fabric cleaning method
Release Time | 2017-02-16
Turning to the curtain fabric cleaning, we must first understand the maintenance of textile fabrics conditions:
1, regular or special inspection
2, regular or special cleaning
The cycle and nature of inspection and cleaning are largely determined by:
1, the fabric work position: in the vertical direction, the sediment will be placed on the surface of the material less than the sediment.
2, the extent to which the fabric is exposed to climatic drops (rain, wind, hail, snow), organic fall (leaves, pollen, dust) and environmental pollution.
3, the nature of the sediment and the bulk density.
Next to introduce the shade fabric cleaning method:
First, regular cleaning
1) the fabric is completely open.
2) Use a non-metallic soft brush, starting with the most exposed side of the contamination, brushing the edges with water (using a vacuum cleaner to remove dust, use sponge with cold water (no more than 30 degrees) plus neutral detergent 1 liter of water plus 5g soap sheet), rinse with water, and then pull the sun curtain down to dry and test whether the fabric is flat, please do not use too much force to scrub the fabric.
3) Use a non-corrosive cleaning spirit when cleaning.
4) rinse with plenty of water.
5) If the weather conditions permit, the fabric in the outdoor or air circulation to start drying.
2, special cleaning
Some deposits are difficult to remove by the cleaning method described above and may involve the following:
1, mineral source accumulation: fat body, asphalt, lime and so on.
2, plant source accumulation: leaves, pollen, resin and so on.
3, animal source accumulation: guano, insects and other broken
The nature of these deposits will cause the failure of the traditional cleaning method, if you want to remove, it is bound to use the fabric with the destruction of the solvent. Therefore, before the start of the operation, you must carefully measure the need for the operation, and want expert advice.
3, note
The chemical resistance of fabric fabrics to external erosion depends on a variety of factors such as the state of the chemical (solid, liquid or gas), temperature, concentration, and contact time. In some cases, each individual wash spirit is harmless, but mixed together can cause negative results.
In this case, it is strictly forbidden to use:
1) The following cleaning methods:
? all the nature of the abrasive: powder, paste Zhuangzi, liquid, frosted sponge and so on.
? Generate pressurized steam objects.
2) The following few chemicals:
Ammonia, nitric acid, sulfuric acid, hydrochloric acid, acetic acid, sodium hydroxide, caustic soda, sodium hypochlorite disinfectant.
1, regular or special inspection
2, regular or special cleaning
The cycle and nature of inspection and cleaning are largely determined by:
1, the fabric work position: in the vertical direction, the sediment will be placed on the surface of the material less than the sediment.
2, the extent to which the fabric is exposed to climatic drops (rain, wind, hail, snow), organic fall (leaves, pollen, dust) and environmental pollution.
3, the nature of the sediment and the bulk density.
Next to introduce the shade fabric cleaning method:
First, regular cleaning
1) the fabric is completely open.
2) Use a non-metallic soft brush, starting with the most exposed side of the contamination, brushing the edges with water (using a vacuum cleaner to remove dust, use sponge with cold water (no more than 30 degrees) plus neutral detergent 1 liter of water plus 5g soap sheet), rinse with water, and then pull the sun curtain down to dry and test whether the fabric is flat, please do not use too much force to scrub the fabric.
3) Use a non-corrosive cleaning spirit when cleaning.
4) rinse with plenty of water.
5) If the weather conditions permit, the fabric in the outdoor or air circulation to start drying.
2, special cleaning
Some deposits are difficult to remove by the cleaning method described above and may involve the following:
1, mineral source accumulation: fat body, asphalt, lime and so on.
2, plant source accumulation: leaves, pollen, resin and so on.
3, animal source accumulation: guano, insects and other broken
The nature of these deposits will cause the failure of the traditional cleaning method, if you want to remove, it is bound to use the fabric with the destruction of the solvent. Therefore, before the start of the operation, you must carefully measure the need for the operation, and want expert advice.
3, note
The chemical resistance of fabric fabrics to external erosion depends on a variety of factors such as the state of the chemical (solid, liquid or gas), temperature, concentration, and contact time. In some cases, each individual wash spirit is harmless, but mixed together can cause negative results.
In this case, it is strictly forbidden to use:
1) The following cleaning methods:
? all the nature of the abrasive: powder, paste Zhuangzi, liquid, frosted sponge and so on.
? Generate pressurized steam objects.
2) The following few chemicals:
Ammonia, nitric acid, sulfuric acid, hydrochloric acid, acetic acid, sodium hydroxide, caustic soda, sodium hypochlorite disinfectant.
Shandong Fugelin SunShade Technology Co.,Ltd
Tel:0536-5676668
0536-5235333
Fax:0536-5676998
Email:alice@jinhuisunshade.com
Web: m.hhmanager.cnwww.jinhuisunshade.com
- Contact
- Shandong Fugelin SunShade Technology Co., Ltd
- Add:No.3 Yonghe Road,Dongcheng Ind. Park,Shouguang City
- Code：262700
- Tel：+86-0536-5676668
- Fax：+86-0536-5676998
- Phone：+86-15169628769
- Email：alice@mkjshuter.com
- Add：m.hhmanager.cn
Official micro letter
